Conductive Polymer Films as Textrodes for Biopotential Sensing
2011 (English)Conference paper, Published paper (Other academic)
Abstract [en]
Introduction: After several years of progresses in textile technology and wearable measurement instrumentation, applications of wearable textile-electronics systems are arising providing a stable background for commercial applications. So far, the available commercial solutions are centered on fitness applications and mostly based in the acquisition of heart rate through Textile Electrodes (Textrodes) based on metallic threads or on conductive rubber compounds. Methods and Materials: In this work a novel material approach is presented to produce Textrodes for acquisition of Electrocardiographic (ECG) signals using a conductive polypropylene (PP1386 from Premix, Finland) polymer material. The polymer was film extruded into thin films, and used as such in the Textrode. Conductive Polymer Films (CPF) have been used to produce Textrodes, and its measurement performance has been compared with the ECG signals obtained with commercial Textrode fabrics and conventional Ag/AgCl electrodes. In order to set up the same measurement conditions, a chest strap tailored to host the testing electrodes has been used. Results: The close resemblance of the ECG acquired with the textile fabric electrodes, the Ag/AgCl electrodes and the PP1386 CPF electrodes suggest that the Polymer Electrodes PP1386 are a feasible alternative to the current textile fabrics that use silver thread as conductive material and also to conductive rubber material. Discussion & Conclusion: The availability of the Conductive Polymer Electrode PP1386 in a film form allows the manufacturing of electrodes by conventional textile processes, like lamination or sewing, therefore facilitating the transition from lab prototyping to industrial manufacturing. Replacing the traditional silver thread as conductive element in the fabrication of Textrodes will definitely reduce the material cost per Textrode. Biocompatibility issues and manufacturability issues must be addressed but the exhibited functional performance is showing encouraging results.
Place, publisher, year, edition, pages
Linköpings Universitet , 2011.
Keywords [en]
textile electrodes, polymer electrodes, ECG, Medical & Textile Electronics, Polymer Engineering
National Category
Electrical Engineering, Electronic Engineering, Information Engineering Biomedical Laboratory Science/Technology Other Materials Engineering
Research subject
Textiles and Fashion (General)
Identifiers
URN: urn:nbn:se:hb:diva-6719Local ID: 2320/10114OAI: oai:DiVA.org:hb-6719DiVA, id: diva2:887421
Conference
MedicinTeknikDagarna 2011, Linköping.
2015-12-222015-12-222017-10-13Bibliographically approved