Endre søk
Link to record
Permanent link

Direct link
Kadi, Nawar, ProfessorORCID iD iconorcid.org/0000-0002-1286-7053
Publikasjoner (10 av 30) Visa alla publikasjoner
Sharma, S., Shukla, S., Rawal, A., Jee, S., Ayaydin, F., Vásárhelyi, L., . . . Kadi, N. (2024). Droplet navigation on metastable hydrophobic and superhydrophobic nonwoven materials. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 683, Article ID 132993.
Åpne denne publikasjonen i ny fane eller vindu >>Droplet navigation on metastable hydrophobic and superhydrophobic nonwoven materials
Vise andre…
2024 (engelsk)Inngår i: Colloids and Surfaces A: Physicochemical and Engineering Aspects, ISSN 0927-7757, E-ISSN 1873-4359, Vol. 683, artikkel-id 132993Artikkel i tidsskrift (Fagfellevurdert) Epub ahead of print
Abstract [en]

Rendering any surface non-wettable requires it to be clean and dry after the droplet is deposited or impacted. Leveraging and quantifying the non-periodic or random topology non-wettable is intricate as the Cassie-Baxter state competes with the Wenzel or impaled state, which becomes further challenging for irregular and heterogeneous nonwoven materials. Herein, we report the fundamental insights of the impalement dynamics of droplets on metastable nonwovens and self-similar nonwoven-titanate nanostructured materials (SS-Ti-NMs) using laser scanning confocal microscopy in three dimensions. Our results represent the first example of liquid imbibition in metastable nonwovens and SS-Ti-NMs involving a complex interplay between a triumvirate of factors – the number of fibres in the defined cross-sectional area (volume), pore features, and intrinsic wetting properties of the constituent entities. Predictive models of the apparent contact angle and breakthrough pressure for nonwovens and their SS-Ti-NMs have been proposed based on micro- and nano-scale structural parameters. Enabled by X-ray microcomputed tomography analysis, a key set of three-dimensional fibre and structural parameters of nonwovens has been unveiled, which played a vital role in validating the predictive models of apparent contact angles.

HSV kategori
Forskningsprogram
Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-31123 (URN)10.1016/j.colsurfa.2023.132993 (DOI)2-s2.0-85181536088 (Scopus ID)
Forskningsfinansiär
Vinnova, 2021–04740
Tilgjengelig fra: 2024-01-05 Laget: 2024-01-05 Sist oppdatert: 2024-02-01bibliografisk kontrollert
Johansson, M., Skrifvars, M., Kadi, N. & Dhakal, H. N. (2023). Effect of lignin acetylation on the mechanical properties of lignin-poly-lactic acid biocomposites for advanced applications. Industrial crops and products (Print), 202, Article ID 117049.
Åpne denne publikasjonen i ny fane eller vindu >>Effect of lignin acetylation on the mechanical properties of lignin-poly-lactic acid biocomposites for advanced applications
2023 (engelsk)Inngår i: Industrial crops and products (Print), ISSN 0926-6690, E-ISSN 1872-633X, Vol. 202, artikkel-id 117049Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Bioplastics that possess characteristics like durability and low cost are desired for versatile applications in industries such as automotive manufacturing, marine transport manufacturing, aerospace applications, and the building industry. The automotive industry is an example of an industry that is now shifting towards a more focused approach addressing the issue concerning sustainability and the development of sustainable material. To achieve a lightweight and sustainable construction, one of the methods used by the automotive original equipment manufacturers is by substituting conventional fossil-based, non-renewable composites, and metallic materials with a bio-based alternative. One of the drawbacks with biobased polymers can be the poor interfacial adhesion, leading to poor mechanical properties when compares to conventional material. The aim of this research is to investigate if a low-cost by-product could be used as a component in a composite matrix material in the automotive industry to reduce the final weight and increase the non-petrochemical material usage of composite material without compromising the thermal and mechanicals properties demanded. In this research, lignin was chemically altered by esterification the functional groups to increase the compatibility with polylactic acid. The esterification was performed with the use of acetic acid anhydride and pyridine. To evaluate and determine the esterification, Fourier transform Infrared Spectroscopy was used. By blending the modified lignin with polylactic acid the intention was to improve the thermomechanical properties and the interfacial linkage between the components. The effects of lignin acetylation on the tensile properties, impact strength, and thermal stability and moisture repellence behaviour were investigated. According to the experimental results the modification of lignin, increased the impact strength for all the blends containing acetylated lignin compares to pristine lignin. The largest increase observed was for blends containing 20 wt% acetylated lignin and polylactic acid, which resulted in a 74% improvement compared with the blend composed of pristine lignin and polylactic acid. Similarly, the thermal stability was improved significantly with acetylation of the lignin. Moreover, the moisture repellence behaviour was also increased. The reason for the improved properties can be explained by the better interfacial compatibility between lignin and polylactic acid matrix. An increased thermal stability and a moisture repellent behaviour of the blends containing chemically modified lignin could be observed when compared with neat polylactic acid which makes the acetylation treatment of lignin a possible approach for the future of biocomposite production. 

sted, utgiver, år, opplag, sider
Elsevier, 2023
Emneord
Acetylation, Biocomposites, Impact toughness, Lignin, Polylactic acid, Costs, Lactic Acid, Mixing, Polyesters, Automotive industry, Blending, Construction industry, Esters, Fourier transform infrared spectroscopy, Sustainable development, Thermodynamic stability, Weathering, %moisture, Advanced applications, Automotive manufacturing, Bio-plastics, Biocomposite, Composites material, Low-costs, Modified lignins, Poly lactic acid, byproduct, chemical reaction, composite, equipment, mechanical property, sustainability, Impact strength
HSV kategori
Identifikatorer
urn:nbn:se:hb:diva-30307 (URN)10.1016/j.indcrop.2023.117049 (DOI)001023027100001 ()2-s2.0-85162265698 (Scopus ID)
Tilgjengelig fra: 2023-08-14 Laget: 2023-08-14 Sist oppdatert: 2024-02-01bibliografisk kontrollert
Kahoush, M. & Kadi, N. (2023). FINOLA hemp fiber: from waste to technical textiles. In: : . Paper presented at 2nd International Conference on Knowledge-based Textiles 2023.
Åpne denne publikasjonen i ny fane eller vindu >>FINOLA hemp fiber: from waste to technical textiles
2023 (engelsk)Konferansepaper, Oral presentation with published abstract (Fagfellevurdert)
Abstract [en]

Textile industry is witnessing the renaissance of hemp fiber, due to its sustainability. FINOLA is a breed of hemp that is grown in cold climates for grain production, including EU countries. 

However, after harvest, the residual stalks of these plants are considered low-value waste by-products. In this paper, we aim at optimizing the best methodology to extracting the short fibers from these agri-waste residue of FINOLA hemp, and to use them to produce higher-value technical textiles that can be used in many industries, such as construction and automotive, as an alternative to fossil-based fibers. Ultra-sound assisted mechanical extraction, with a multiple-step process had been developed for this residue. The obtained fibers are analyzed, and the relation between the process parameters and the fiber length is being investigated. The storage conditions will be assessed in relation with the obtained fiber length as well. This process is foreseen to increase the efficiency of this agricultural resource and contribute to circular economy and sustainability of textile sector.

Emneord
hemp, waste, nonwoven, technical textile
HSV kategori
Forskningsprogram
Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-30100 (URN)
Konferanse
2nd International Conference on Knowledge-based Textiles 2023
Prosjekter
Bio-based residual streams with potential in the technical textile industry
Forskningsfinansiär
Vinnova, 2021-03719
Tilgjengelig fra: 2023-07-26 Laget: 2023-07-26 Sist oppdatert: 2023-08-10bibliografisk kontrollert
Kahoush, M. & Kadi, N. (2023). Finola hemp: Fibre extraction from crops intended for grain-production. In: : . Paper presented at 6th INTERNATIONAL CONFERENCE ON NATURAL FIBERS ICNF.
Åpne denne publikasjonen i ny fane eller vindu >>Finola hemp: Fibre extraction from crops intended for grain-production
2023 (engelsk)Konferansepaper, Poster (with or without abstract) (Fagfellevurdert)
Abstract [en]

This work reports the mechanical extraction process of Finola hemp fibres from the agri-waste of the food industry. FINOLA is a breed of hemp that is grown in cold climates for grain production, including EU countries. However, after harvest, the residual stalks of these plants are considered low-value waste by-products. In this paper, we aim at optimizing the methodology to extracting the short fibres from these agri-waste residue of FINOLA hemp, and to use them to produce higher-value technical textiles that can be used in many industries, such as construction and automotive, as an alternative to fossil-based fibres. Mechanical extraction, with a multiple-step process had been developed for this residue. The obtained fibres showed the potential of use as a material to produce nonwovens from 100% hemp or hemp blends with other fibres. This process is foreseen to increase the efficiency of this agricultural resource and contribute to circular economy and sustainability of textile sector.

Emneord
hemp fiber, waste, nonwoven, technical textile
HSV kategori
Forskningsprogram
Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-30101 (URN)
Konferanse
6th INTERNATIONAL CONFERENCE ON NATURAL FIBERS ICNF
Prosjekter
Bio-based residual streams with potential in the technical textile industry
Forskningsfinansiär
Vinnova, 2021-03719
Tilgjengelig fra: 2023-07-26 Laget: 2023-07-26 Sist oppdatert: 2023-08-10bibliografisk kontrollert
Lindström, K., van der Holst, F., Berglin, L., Persson, A. & Kadi, N. (2023). Investigation Of Abrasive Pre-Treatment To Mitigate Length Loss During Mechanical Textile Recycling. In: : . Paper presented at AUTEX 2023 Conference, Melbourne, Australia, 26-28 June, 2023..
Åpne denne publikasjonen i ny fane eller vindu >>Investigation Of Abrasive Pre-Treatment To Mitigate Length Loss During Mechanical Textile Recycling
Vise andre…
2023 (engelsk)Konferansepaper, Oral presentation with published abstract (Fagfellevurdert)
Abstract [en]

The environmental burden of the textile industry can be decreased with an increased use of mechanically recycled fibers. However, it is well known that the recycling process is harsh and shortens the fibers substantially. Still, little has been investigated about the influencing factors of the fiber length loss. 

Previous research has shown that the parts of a garment that is more worn, lose less fiber length in the mechanical recycling process.1 One explanation could be that a loss of fibers during wearing create a more open structure of the textile. By removing fibers from the yarns in a textile, the yarn structure is partly broken down, and the yarn linear density is decreased. The strength of spun staple fiber yarns is dependent on the friction and contact surfaces between fibers. In addition, fiber migration, the variation of radial position of a fiber in the yarn, causes the fibers to lock between different helical layers and thus creates a self-locking mechanism giving strength to the yarn.2 Removal of any fiber in such a yarn affect all fibers in contact with that fiber. This in turn makes both the textile and yarns weaker and consequently more easily disentangles in a mechanical recycling process – keeping more of the fiber length. 

The work at hand investigated this theory by subjecting woven cotton textiles with abrasion treatment prior to mechanical recycling. We compared two different methods of abrasion with unabraded textile. The two pre-treatment abrasion methods used were rubbing with sandpaper and raising with steel pins. By measuring the fiber length post mechanical recycling, we could estimate the efficiency of the recycling process in respect to preservation of the fiber. 

Results showed that only the raising process had a positive impact in mitigating fiber length loss through the recycling process. During the rubbing with sandpaper, the fabric was pressed and thus became denser. On the contrary, the raising process pulled out the fibers and created a fuzzy surface. As the removal of any fiber affect all fibers in direct contact, even fibers in the center of the yarn are affected when surface fibers are pulled out or weakened. The raising process extracted fibers which opened up the fabric and affected the yarn structure. Hence, the yarns were more easily disentangled in the recycling process. The result gives great insight into the mechanisms of mechanical recycling and can be used for future development of the same. 

Emneord
Mechanical textile recycling, abrasion pre-treatment, fiber length loss, recycling efficiency
HSV kategori
Forskningsprogram
Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-30392 (URN)
Konferanse
AUTEX 2023 Conference, Melbourne, Australia, 26-28 June, 2023.
Tilgjengelig fra: 2023-08-31 Laget: 2023-08-31 Sist oppdatert: 2023-08-31bibliografisk kontrollert
Uusi-Tarkka, E.-K., Skrifvars, M., Khalili, P., Heräjärvi, H., Kadi, N. & Haapala, A. (2023). Mechanical and Thermal Properties of Wood-Fiber-Based All-Cellulose Composites and Cellulose-Polypropylene Biocomposites. Polymers, 15(3), Article ID 475.
Åpne denne publikasjonen i ny fane eller vindu >>Mechanical and Thermal Properties of Wood-Fiber-Based All-Cellulose Composites and Cellulose-Polypropylene Biocomposites
Vise andre…
2023 (engelsk)Inngår i: Polymers, E-ISSN 2073-4360, Vol. 15, nr 3, artikkel-id 475Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This article explores wood-fiber-based fabrics containing Lyocell yarn in the warp and Spinnova–Lyocell (60%/40%) yarn in the weft, which are used to form unidirectional all-cellulose composites (ACC) through partial dilution in a NaOH–urea solution. The aim is to investigate the role of the yarn orientation in composites, which was conducted by measuring the tensile properties in both the 0° and 90° directions. As a reference, thermoplastic biocomposites were prepared from the same fabrics, with biobased polypropylene (PP) as the matrix. We also compared the mechanical and thermal properties of the ACC and PP biocomposites. The following experiments were carried out: tensile test, TGA, DSC, DMA, water absorption test and SEM. The study found no significant difference in tensile strength regarding the Spinnova–Lyocell orientation between ACC and PP biocomposites, while the composite tensile strength was clearly higher in the warp (Lyocell) direction for both composite variants. Elongation at break doubled in ACC in the Lyocell direction compared with the other samples. Thermal analysis showed that mass reduction started at a lower temperature for ACC, but the thermal stability was higher compared with the PP biocomposites. Maximum thermal degradation temperature was measured as being 352 °C for ACC and 466 °C for neat PP, and the PP biocomposites had two peaks in the same temperature range (340–474 °C) as ACC and neat PP combined. ACCs absorbed 93% of their own dry weight in water in just one hour, whereas the PP biocomposites BC2 and BC4 absorbed only 10% and 6%, respectively. The study highlights the different properties of ACC and PP reference biocomposites that could lead to further development and research of commercial applications for ACC.

Emneord
ACC, laminate, mechanical performance, NaOH–urea solvent, single-polymer composite, sustainability, textile structures, thermal analysis, wood fibers
HSV kategori
Forskningsprogram
Resursåtervinning; Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-29466 (URN)10.3390/polym15030475 (DOI)000932882300001 ()2-s2.0-85147935299 (Scopus ID)
Tilgjengelig fra: 2023-02-23 Laget: 2023-02-23 Sist oppdatert: 2024-01-17bibliografisk kontrollert
Kahoush, M. & Kadi, N. (2023). Opening Ratio vs. Quality: Optimizing Fibre Extraction from Hemp Residues. In: Magdalena Tokarska (Ed.), Innovation aspects of textile industry: . Paper presented at InnovaTex 2023 (pp. 48-51). Lodz: Technical University of Lodz
Åpne denne publikasjonen i ny fane eller vindu >>Opening Ratio vs. Quality: Optimizing Fibre Extraction from Hemp Residues
2023 (engelsk)Inngår i: Innovation aspects of textile industry / [ed] Magdalena Tokarska, Lodz: Technical University of Lodz, 2023, s. 48-51Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Hemp has emerged as a sustainable alternative to various materials in multiple industries, from textiles to construction. One of the most crucial aspects of optimizing its industrial application is extracting good fibre. While various chemical and mechanical methods exist for this extraction, the mechanical route is often favoured for its eco-friendly profile. This study aims to explore how the 'opening ratio' in mechanical extraction machinery affects the quality of hemp fibres obtained from residues. 

The hemp residue being used comes from Finola hemp; a variety of hemp known for its seeds. However, Finola also contains fibres with potential for various applications. Mechanical extraction trials were conducted using varying opening ratios on a special decorticator machine; the fibres obtained were then subject to a series of quality tests, including tensile strength and fibre length. Preliminary findings suggest a correlation between the opening ratio and fibre quality. This research carries significant implications for the industrial application of hemp fibres. An optimized opening ratio in mechanical extraction processes could enhance the commercial value of hemp fibres while promoting sustainability by turning residues into valuable raw materials. The potential for using Finola fibres in textiles, composites, and other industrial applications is worth exploring.

sted, utgiver, år, opplag, sider
Lodz: Technical University of Lodz, 2023
Emneord
Hemp fibre, Mechanical extraction, Finola residue, Mechanical properties, Opening ratio
HSV kategori
Forskningsprogram
Textil och mode (generell)
Identifikatorer
urn:nbn:se:hb:diva-30985 (URN)978-83-66287-69-3 (ISBN)
Konferanse
InnovaTex 2023
Prosjekter
Vinnova - 2021-03719
Forskningsfinansiär
Vinnova, 202103719Knowledge Foundation, 20210067
Tilgjengelig fra: 2023-12-12 Laget: 2023-12-12 Sist oppdatert: 2023-12-13bibliografisk kontrollert
Ehsanimehr, S., Sonnier, R., Badawi, M., Ducos, F., Kadi, N., Skrifvars, M., . . . Vahabi, H. (2023). Sustainable Flame-Retardant Flax Fabrics by Engineered Layer-by-Layer Surface Functionalization with Phytic Acid and Polyethylenimine. Fire technology
Åpne denne publikasjonen i ny fane eller vindu >>Sustainable Flame-Retardant Flax Fabrics by Engineered Layer-by-Layer Surface Functionalization with Phytic Acid and Polyethylenimine
Vise andre…
2023 (engelsk)Inngår i: Fire technology, ISSN 0015-2684, E-ISSN 1572-8099Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

New generation of mission-oriented fabrics meets advanced requirements; such as electrical conductivity, flame retardancy, and anti-bacterial properties. However, sustainability concerns still are on-demand in fabrication of multi-functional fabrics. In this work, we used a bio-based phosphorus molecule (phytic acid, PA) to reinforce flax fabrics against flame via layer-by-layer consecutive surface modification. First, the flax fabric was treated with PA. Then, polyethylenimine (PEI) was localized above it to create negative charges, and finally PA was deposited as top-layer. Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), and inductively-coupled plasma atomic emission spectrometry (ICP-AES) proved successful chemical treatment. Pyrolysis-combustion flow calorimetry (PCFC) showed significant drop by about 77% in the peak of heat release rate (pHRR) from 215 W/g for untreated to 50 W/g for treated flax fabric. Likewise, the total heat release (THR) decreased by more than three times from 11 to 3.2 kJ/g. Mechanical behavior of the treated flax fabric was completely different from untreated flax fabrics, changing from almost highly-strengthened behavior with short elongation at break to a rubber-like behavior with significantly higher elongation at break. Surface friction resistance was also improved, such that the abrasion resistance of the modified fabrics increased up to 30,000 rub cycles without rupture.   

HSV kategori
Forskningsprogram
Textil och mode (generell); Resursåtervinning
Identifikatorer
urn:nbn:se:hb:diva-29583 (URN)10.1007/s10694-023-01387-7 (DOI)000956756000001 ()2-s2.0-85150906609 (Scopus ID)
Tilgjengelig fra: 2023-03-29 Laget: 2023-03-29 Sist oppdatert: 2023-04-13bibliografisk kontrollert
Uusi-Tarkka, E.-K., Levanič, J., Heräjärvi, H., Kadi, N., Skrifvars, M. & Haapala, A. (2022). All-Cellulose Composite Laminates Made from Wood-Based Textiles: Effects of Process Conditions and the Addition of TEMPO-Oxidized Nanocellulose. Polymers, 14(19), Article ID 3959.
Åpne denne publikasjonen i ny fane eller vindu >>All-Cellulose Composite Laminates Made from Wood-Based Textiles: Effects of Process Conditions and the Addition of TEMPO-Oxidized Nanocellulose
Vise andre…
2022 (engelsk)Inngår i: Polymers, E-ISSN 2073-4360, Vol. 14, nr 19, artikkel-id 3959Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

All-cellulose composites (ACCs) are manufactured using only cellulose as a raw material. Biobased materials are more sustainable alternatives to the petroleum-based composites that are used in many technical and life-science applications. In this study, an aquatic NaOH-urea solvent system was used to produce sustainable ACCs from wood-based woven textiles with and without the addition of TEMPO-oxidized nanocellulose (at 1 wt.-%). This study investigated the effects of dissolution time, temperature during hot press, and the addition of TEMPO-oxidized nanocellulose on the mechanical and thermal properties of the composites. The results showed a significant change in the tensile properties of the layered textile composite at dissolution times of 30 s and 1 min, while ACC elongation was the highest after 2 and 5 min. Changes in hot press temperature from 70 °C to 150 °C had a significant effect: with an increase in hot press temperature, the tensile strength increased and the elongation at break decreased. Incorporating TEMPO-oxidized nanocellulose into the interface of textile layers before partial dissolution improved tensile strength and, even more markedly, the elongation at break. According to thermal analyses, textile-based ACCs have a higher storage modulus (0.6 GPa) and thermal stabilization than ACCs with nanocellulose additives. This study highlights the important roles of process conditions and raw material characteristics on the structure and properties of ACCs. 

sted, utgiver, år, opplag, sider
Basel: , 2022
Emneord
biocomposite, NaOH-urea, solvent system, TEMPO-oxidized nanocellulose, wood fiber
HSV kategori
Identifikatorer
urn:nbn:se:hb:diva-28827 (URN)10.3390/polym14193959 (DOI)000867020700001 ()2-s2.0-85139829407 (Scopus ID)
Tilgjengelig fra: 2022-10-28 Laget: 2022-10-28 Sist oppdatert: 2024-01-17bibliografisk kontrollert
Baghaei, B., Johansson, B., Skrifvars, M. & Kadi, N. (2022). All-Cellulose Composites Properties from Pre- and Post-Consumer Denim Wastes: Comparative Study. Journal of Composites Science, 6(5), Article ID 130.
Åpne denne publikasjonen i ny fane eller vindu >>All-Cellulose Composites Properties from Pre- and Post-Consumer Denim Wastes: Comparative Study
2022 (engelsk)Inngår i: Journal of Composites Science, E-ISSN 2504-477X, Vol. 6, nr 5, artikkel-id 130Artikkel i tidsskrift (Annet (populærvitenskap, debatt, mm)) Published
Abstract [en]

This study reports the recycling of discarded denim textiles by the production of all-cellulose composites (ACCs). Discarded denim fabrics were shredded into fibers and then made into nonwoven fabrics by carding and needle punching. The produced nonwoven fabrics were converted to ACCs by one-step and two-step methods using an ionic liquid (IL), 1-butyl-3-methyl imidazolium acetate ([BMIM][Ac]). In this study, the effect of different ACC manufacturing methods, denim fabrics with different contents (a 100% cotton denim (CO) and a blend material (cotton, poly-ester and elastane (BCO)) and reusing of IL as a recycled cellulose solvent on the mechanical pro-perties of the formed ACCs were investigated. The ACCs were characterized according to their tensile and impact properties, as well as their void content. Microscopic analysis was carried out to study the morphology of a cross-section of the formed composites. The choice of the one-step method with recycled IL, pure IL or with a blend material (BCO) had no influence on the tensile properties. Instead, the result showed that the two-step method, with and without DMSO, will influence the E-modulus but not the tensile strength. Regarding the impact properties of the samples, the only factor likely to influence the impact energy was the one-step method with CO and BCO.

Emneord
all-cellulose composites, end-of-life textiles, denim fabrics, ionic liquid, mechanical properties, sustainability
HSV kategori
Identifikatorer
urn:nbn:se:hb:diva-27987 (URN)10.3390/jcs6050130 (DOI)000804303600001 ()2-s2.0-85147702835 (Scopus ID)
Forskningsfinansiär
Swedish Research Council Formas, 2016‐00920
Tilgjengelig fra: 2022-06-13 Laget: 2022-06-13 Sist oppdatert: 2024-02-01bibliografisk kontrollert
Organisasjoner
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-1286-7053